FL2 Error Message

Conversation related to service and repair of Sundance, Sweetwater, and Del Sol spas.
Forum rules
Electricity is dangerous, it can kill you. Always turn off electricity before removing any equipment doors. All text in this forum is for informational use only, we provide it to assist people that want to repair equipment themselves. We always recommend having work done by a factory trained professional.
Post Reply
User avatar
Amos
Posts: 37
Joined: July 8th, 2014, 7:23 pm

FL2 Error Message

Post by Amos » July 9th, 2014, 9:16 am

FL2 error code means the circuit board is sensing the pressure switch or flow switch is in the closed position when it shouldn't be.

This can be due to a stuck or failed pressure switch or flow switch.

User avatar
Amos
Posts: 37
Joined: July 8th, 2014, 7:23 pm

Re: FL2 Error Message

Post by Amos » June 2nd, 2017, 5:18 pm

What model of Sundance do you have? If you have a model with a flow switch I would start by turning off the power and tapping the switch, they sometimes can stick due to debris stuck up against them. If you have a model with a pressure switch it most likely has failed.

If you have not gotten the issue resolved let me know what model of Sundance spa you have and I can most likely help you further.
Sorry for the delay in response.

Post Reply